Hydraulic Control Unit
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Bleed air from the brake line, and perform No. 1) - 22) in the following reference
. Ref. to BRAKE>Air Bleeding>PROCEDURE>BRAKE LINE .CAUTION:
- If there is a possibility that air enters the pressure control section in the hydraulic control unit, perform No. 11) - 16) .
- For normal air bleeding operation, do not operate the sequence control for the hydraulic control unit. (Operating the sequence control may let air in the normal air bleeding passages move to the pressure control section.)
- Be sure to perform the ABS sequence control mode first before the VDC sequence control mode.
NOTE: If there is a possibility that air enters the pressure control section in the hydraulic control unit, perform the sequence control mode for both of the ABS and VDC systems. (Refer to steps 10) to 16) for brake lining.)