General Tool
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| TOOL NAME | REMARKS |
|---|---|
| Cap | Used for brake hose installing portion of caliper body. |
| Circuit tester | Used for measuring resistance, voltage and current. |
| Dial gauge | Used for measuring brake disc run-out. |
| Magnet stand | Used for measuring brake disc run-out. |
| Micrometer | Used for measuring the brake disc thickness. |
| Disc brake piston tool | Used for pushing back the electronic parking brake piston.
or equivalent |
| Disc brake piston tool | Used for pushing back the piston. (Except for electronic parking brake) |
| Vacuum gauge | Used for measuring the operation and airtightness of the brake booster. |
| Flare nut wrench | Used for removing and installing the brake pipe. |
| Pressure gauge | Used for measuring the operation and airtightness of the brake booster. |
| Hexagon wrench | Width across flat 11 mm (0.43 in)
|
| Hexagon wrench | Width across flat 7 mm (0.28 in) Used for removing and installing the electronic parking brake caliper. |
| DST-i | Used together with Subaru Select Monitor 4. |
| PISTON BOOT INSTALLER | Used for installing the front caliper boot piston. Continental 03.9314.4914.1/760190 |