Section 3 (Body Control System (Diagnostics)): Customize: Operation

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

On [Start] screen, select [Diagnosis].
On [Vehicle selection] screen, input the target vehicle information and select [OK].
On [Main Menu] screen, select [Each System].
On [Select System] screen, select [Body Control], and then select [Enter].
On [Select Function] screen, select [Customize].
When the setting is complete, make sure that the alterations by [Data monitor] are consistent with the actual equipment on the vehicle.
NOTE:
- For detailed operation procedures, refer to "Help" of application.
- If not equipped (depending on destination area or vehicle equipment condition), process will not go on.