Inspection Mode 5

WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.

DTC	Item	Note
B1015	KEY INTERLOCK CIRCUIT	CVT model without the keyless access with push button start system

Diagnostic procedure:

Using the Subaru Select Monitor, perform the clear memory of [Body Control]. Ref. to COMMON (diag)>CLEAR MEMORY .
Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step 1). Ref. to BODY CONTROL (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .
Turn the ignition switch to ON, shift the select lever in other than P range, and wait for 10 seconds or more.
Using the Subaru Select Monitor, read the DTC of [Body Control] to check that there is no DTC displayed. Ref. to BODY CONTROL (DIAGNOSTICS)>Diagnostic Trouble Code (DTC) .
NOTE: If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. Ref. to BODY CONTROL (DIAGNOSTICS)>Diagnostic Trouble Code (DTC)>LIST .