Backup Battery
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the data communication module. Ref. to ENTERTAINMENT & MONITORING>Data Communication Module>REMOVAL>DATA COMMUNICATION MODULE .
- Remove the backup battery.
- Remove the cap screw, and then remove the battery cover.
Preparation tool:
TORX® T10
- Disconnect the connector and remove the backup battery.
- Remove the cap screw, and then remove the battery cover.