Power Rear Gate Touch Sensor: Inspection
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
- Visually check the power rear gate touch sensor for cracks or damages, and replace as necessary.
- Measure the resistance between connector terminals.
Preparation tool:
Circuit tester
Terminal No. Inspection conditions Standard Connection diagram 1 - 2 ON (with the sensor pressed) Less than 2 kΩ OFF (always) Approx. 10 kΩ - Replace the power rear gate touch sensor if the inspection result is not within the standard value.