General Tool
WARNING: This page is about a different car, the 2021 Subaru Ascent. However, it is still accessible from the selected car via links, so may be relevant.
| TOOL NAME | REMARKS |
|---|---|
| KTC connector terminal tool (part number: ECC-1T) | Used for pulling out the terminals.
NOTE:
A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.
|
| Circuit tester | Used for measuring resistance, voltage and current. |
| DST-i | Used together with Subaru Select Monitor 4. |