LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> Outback Touring XT >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System (Tr690) >> Primary Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Primary Speed Sensor: Installation

CAUTION:

If water or oil contacts the connector terminal of primary speed sensor, replace it with a new part. 

  1. Install the primary speed sensor using a new O-ring, and connect the connector.
    NOTE:

    Apply CVTF to the O-rings. 

    Tightening torque: 

    5 N.m (0.5 kgf-m, 3.7 ft-lb)

  2. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>INTERCOOLER>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .