LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Access Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Installation

CAUTION:

When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type H" described in "REGISTRATION MANUAL FOR IMMOBILIZER". 

  1. Install the keyless access control module and connect the connector.
  2. Install the blower motor relay.
  3. Install the panel instrument passenger and pocket COMPL. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>INSTALLATION>BACK PANEL
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
scientia non olet · About LEMON Manuals