LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Central Gateway Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Central Gateway Control Module: Installation

CAUTION:

When the central gateway control module has been replaced, be sure to perform the module registration. 

  1. Connect the connector and install the central gateway control module.
  2. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION
  3. Install the panel assembly center. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  5. When the central gateway control module has been replaced, perform the module registration. Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION>OPERATION
scientia non olet · About LEMON Manuals