LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> WRX Base, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Data Communication Module >> Installation >> Data Communication Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Communication Module

  1. Install the data communication module and connect the cable CCM connector.
    CAUTION:

    Never install a data communication module from another vehicle. It may disable recognition of vehicle information and cause communication error. 

  2. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION 
  3. Install the panel assembly center and the ornament panel mid passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  5. Perform the registration if the data communication module is replaced with a new part. Ref. to ENTERTAINMENT & MONITORING>TELEMATICS SYSTEM>OPERATION 
  6. Check the LED illumination status of the telematics button. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW>CHECK>LED ILLUMINATION STATUS LIST
scientia non olet · About LEMON Manuals