LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2022 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control/Communication System >> Central Gateway Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Central Gateway Control Module: Removal

  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
  2. Remove the panel assembly center. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>REMOVAL
  3. Remove the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>REMOVAL
  4. Remove the central gateway control module.
    CAUTION:

    Be careful to keep water and other foreign materials away from the central gateway control module terminals. 

    1. Remove the screws and pull out the central gateway control module.
    2. Disconnect the connector and remove the central gateway control module.
      G14612864Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals