Inspection Mode: Procedure

It is possible to diagnose the DTC by performing the indicated inspection mode. After correcting the DTC, perform a necessary inspection mode and make sure that the function is resumed correctly and the DTC is recorded.

1. Using the Subaru Select Monitor, perform the clear memory of [Cockpit Control]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
2. Using the Subaru Select Monitor, read the DTC of [Cockpit Control] to check that there is no DTC displayed. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) 
   NOTE:

   If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs. After solving the DTC, repeat from step   1 . 

3. Turn the ignition switch to ON, and wait for 1 minute or more.
4. Using the Subaru Select Monitor, read the DTC of [Cockpit Control] to check that there is no DTC displayed. Ref. to COCKPIT CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) 
   NOTE:

   If the DTC is displayed on the screen, the trouble is still present. Perform the diagnosis for the displayed DTCs.