LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft System - Security And Locks >> Keyless Access Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Access Control Module: Installation

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For detailed operation procedure, refer to "Type H" described in "REGISTRATION MANUAL FOR IMMOBILIZER".
  1. Install the keyless access Control Module and connect the connector.

    Tightening torque: 

    7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the panel instrument passenger. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>INSTALLATION>BACK PANEL .
  3. Install the heater control assembly. Ref. to AIR CONDITIONER>CONTROL PANEL>INSTALLATION .
  4. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION .
  5. Install the panel center UPR assembly and cover assembly instrument panel side RH. Ref. to AIR CONDITIONER>AIR VENT GRILLE>INSTALLATION>CENTER GRILLE .
  6. Install the cover LWR driver INN. Ref. to EXTERIOR/INTERIOR TRIM>INSTRUMENT PANEL LOWER COVER>INSTALLATION>INSIDE .
  7. Install the cover center side. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CONSOLE>INSTALLATION .
  8. Install the console box assembly and the boot assembly parking brake. Ref. to EXTERIOR/INTERIOR TRIM>CONSOLE BOX>INSTALLATION .
  9. Install the pocket COMPL. Ref. to EXTERIOR/INTERIOR TRIM>GLOVE BOX>INSTALLATION>GLOVE BOX LID .
  10. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals