Unit Registration: Operation

CAUTION: Perform this operation while having all modules installed at shipment connected. (Example: Do not perform this operation with the engine Control Module removed.)

On [Start] screen, select [Immobilizer etc. registration].
On [Select Registration] screen, select [Unit Registration (Update & Verification)]. Then, when a message screen is displayed, follow the instructions on the screen.

NOTE:

When replacing the engine Control Module, perform VIN registration first. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>WORK SUPPORT .
If an error message is displayed during module registration, check the list of error messages. Ref. to COMMON (DIAGNOSTICS)>UNIT REGISTRATION>INSPECTION .
When using the Subaru Select Monitor, turn the ignition switch to ON (engine OFF).