Inspection Mode C
| DTC | Description & trouble part | Condition |
|---|---|---|
| P1817 | MANUAL SWITCH CIRCUIT LOW | - |
Diagnostic procedure:
- Start the engine.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is not completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .
- Using the Subaru Select Monitor, perform the clear memory of [Transmission]. Ref. to COMMON (DIAGNOSTICS)>CLEAR MEMORY
.CAUTION: After performing the clear memory, do not turn the ignition switch to OFF.
- Operate the stop light switch or the manual mode switch.
- Read the data of the stop light switch or the manual mode switch using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DATA MONITOR . Or measure the terminal voltage.
- Check the readiness code of [Transmission] using Subaru Select Monitor and confirm that the diagnosis is completed. Ref. to TRANSMISSION (DIAGNOSTICS)>ALL READINESS DIAGNOSTIC CODE(S) .