Except For Wilderness Model

TORQUE SPECIFICATION - EXCEPT FOR WILDERNESS MODEL

Rear differential type			VA1
LSD type			-
Type of gear			Hypoid gear
Gear ratio			3.700
Drive pinion bearing preload (for new bearing)	When measured with a spring scale (measured at the companion flange bolt hole)	N (kgf, lbf)	12.7 - 32.2 (1.29 - 3.28, 2.86 - 7.24)
	When measured with torque wrench	N.m (kgf-m, ftlb)	0.48 - 1.22 (0.049 - 0.124, 0.354 - 0.900)
	Backlash between the differential bevel gear and differential bevel pinion	mm (in)	0.05 - 0.15 (0.002 - 0.006)
	Hypoid gear set backlash	mm (in)	0.10 - 0.15 (0.004 - 0.006)
	Companion flange mating surface runout	mm (in)	0.08 (0.003)
	Companion flange runout on its inner side	mm (in)	0.08 (0.003)
	Differential gear oil capacity	L (US qt, Imp qt)	0.8 (0.85, 0.70)

Identification:

For identification, refer to "IDENTIFICATION". Ref. to IDENTIFICATION>MODEL NUMBER LABEL>REAR DIFFERENTIAL .

Differential gear oil:

For the differential gear oil, refer to "RECOMMENDED MATERIALS". Ref. to RECOMMENDED MATERIALS .