Data Monitor: List
| Item | Contents | Standard | Note |
|---|---|---|---|
| +POWER B | Power supply voltage value Display range: 0.00 - 21.5 V |
10.5 - 16 V | - |
| + B | Power rear gate Control Module power supply voltage value Display range: 0.00 - 21.5 V |
10.5 - 16 V | - |
| IGN SW | Ignition switch status | ON: IGN ON OFF: IGN OFF |
- |
| Memory stop SW | Memorized height switch status | ON: Switch ON OFF: Switch OFF |
- |
| D SW | Driver's seat switch status | ON: Switch ON OFF: Switch OFF |
- |
| R/G inner SW | Power rear gate inner switch condition | ON: Switch ON OFF: Switch OFF |
- |
| LATCH SW | Latch switch status | ON: Switch ON OFF: Switch OFF |
- |
| SECTOR SW | Sector switch status | OFF: When the switch is OFF (no continuity) ON: When the switch is ON (continuity exists) |
- |
| PRG MOTOR (OPEN) | Output status of rear gate motor open signal | OPEN: When rear gate is in open operation OFF: OFF |
- |
| PRG MOTOR (CLOSE) | Output status of rear gate motor open signal | CLOSE: When rear gate is in close operation OFF: OFF |
- |
| CLOSER (OPEN) | Output status of power rear gate auto closer motor open signal |
OPEN: When open signal is output OFF: OFF |
- |
| CLOSER (CLOSE) | Output status of power rear gate auto closer motor close signal | CLOSE: When close signal is output OFF: OFF |
- |
| BUZZER | Buzzer output status | ON: When buzzer sounds OFF: When buzzer stops |
- |
| HAZARD | Hazard output status | ON: When hazard is ON OFF: When hazard is OFF |
- |
| RATCHET SW | Ratchet switch condition | ON: Switch ON OFF: Switch OFF |
- |
| Connection Continuing Flag | Communication continuation request flag presence/absence | Flag not Flag |
- |
| Idle Stop Cancel Flag | Auto Start Stop cancel request status | Flag: When there is an Auto Start Stop cancellation not Flag: When there is no Auto Start Stop |
- |
| IGN | Ignition switch status (body integrated unit) | ON: IGN ON OFF: IGN OFF |
- |
| R/G Open SW | Rear gate opener button status | OFF: When set to OFF Short Push: When pressed shortly Long Push: When pressed long |
- |
| Front Wheel Speed | Status of vehicle speed Display range: 0 - 229.5 km/h (0 - 142.6 MPH) | Shows vehicle speed | - |
| Normal Keyless R/G SW | Status of normal keyless R/G button | OFF: When set to OFF Short Push: When pressed shortly Long Push: When pressed long |
- |
| Smart Keyless R/G SW | Status of keyless access key R/G button | OFF: When set to OFF Short Push: When pressed shortly Long Push: When pressed long |
- |
| Idle Stop Control | Auto Start Stop control status | Idle Stop Control Idle Stop Uncontrol |
- |
| P range SW | Status of shift lever P | ON: P range OFF: Other than P range |
- |
| MT/AT | Vehicle information (body integrated unit) | MT: MT model AT: AT model |
- |
| R/G Open Authorized State | PRG R/G open permission condition (except for driver's SW) | Authorized State: PRG open permitted state Unauthorized State: PRG open not permitted state |
- |
| Answer-Back Buzzer Information | Buzzer setting information Display range: ON/OFF | ON: When buzzer is ON OFF: When buzzer is OFF |
- |
| EPB Operation Status | Electronic parking brake condition | Error: When EPB error occurs Release: When EPB is released Operate: When EPB operates Operating: EPB operation in-progress Releasing: EPB release in-progress Parking: When dynamic parking operates |
- |
| Driver's SW, R/G Open Authorized State | R/G open permission condition for PRG driver's SW | Authorized State: PRG open permitted state Unauthorized State: PRG open not permitted state |
- |
| TOUCH SENSOR | Touch sensor status | ON: Sensor is ON OFF: Sensor is OFF |
- |
| Rear Gate Target Speed | Rear gate target speed Display range: 0 - 510 mm/s |
Displays rear gate open/close target speed | - |
| Rear Gate Speed | Rear gate actual speed Display range: 0 - 510 mm/s | Displays rear gate open/close speed | - |
| PRG MOTOR Duty | Rear gate motor DUTY output value Display range: 0 - 127.5 % | Displays rear gate motor DUTY output | - |
| Pulse-count 2 | Rear gate motor pulse count output Display range: 0 - 65535 |
Displays rear gate motor pulse count | Rear gate manual open/close range Reference value: 0 - 2210 |
| Rear Gate Pos Init Flag | Rear gate position initialization status | ON: When pulse count is recognized (when initialization is finished) OFF: When pulse count is unknown |
- |
| PRG State 2 | PRG status | Full Open: Stopped while the pulse count is at full open stop position or more Half Stop: Stopped while the pulse count is at full open stop position or less Operating: When PRG motor or closer motor is operating Full Close: Full latch status |
- |