Section 6 (Engine Mechanical System (2.4L)): General Description: Specification: Engine
WARNING: This page is about a different variant/trim than selected.
| Model | 2.4 L | ||
| Cylinder arrangement | Horizontally opposed, liquid cooled, 4-cylinder 4-stroke gasoline engine | ||
| Valve system mechanism | Chain driven, double overhead camshaft, 4-valve/cylinder | ||
| Bore x Stroke | mm (in) | 94.0 x 86.0 (3.70 x 3.39) | |
| Displacement | cm3 (cu in) | 2, 387 (146) | |
| Compression ratio | 10.6 | ||
| Compression pressure (at 200 - 300 r/min) | kPa (kg/cm2 , psi) | Standard | 1, 350 - 1, 750 (14 - 18, 196 - 254) |
| Number of piston rings | Compression ring: 2 Oil ring: 1 | ||
| Intake valve timing | Open | Max. retard | ATDC 36° |
| Min. advance | BTDC 42° | ||
| Close | Max. retard | ABDC 92° | |
| Min. advance | ABDC 14° | ||
| Exhaust valve timing | Open | Max. retard | BBDC 11° |
| Min. advance | BBDC 66° | ||
| Close | Max. retard | ATDC 55° | |
| Min. advance | ATDC 0° | ||
| Cam clearance mm (in) |
Intake | Standard | 0.13+0.02-0.03 (0.0051+0.0008-0.0012 ) |
| Exhaust | Standard | 0.22 ±0.02 (0.0087±0.0008) | |
| Idle rpm (select lever in "P" or "N" range) r/min | No load | Standard | 700±100 |
| A/C ON | Standard | 800 - 885±100 | |
| Ignition order | 1 → 3 → 2 → 4 | ||
| Ignition timing | BTDC/{r/min} | Standard | 0°±10°/700 |