LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Fuel Injection System (2.4L)) >> Camshaft Position Sensor >> Removal >> Intake
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal: Intake

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Remove the air intake duct. Ref. to INTAKE (INDUCTION) (H4DOTC)>AIR INTAKE DUCT>REMOVAL .
  3. Disconnect the connector (A) and remove the camshaft position sensor.
    G13198284Courtesy of SUBARU OF AMERICA, INC.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Disconnect the connector (A) and remove the camshaft position sensor.
    G13198285Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals