LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> BRZ Limited, Automatic Trans >> Repair and Diagnosis >> General Information >> Identification >> General Information & Specifications >> Pre-Delivery Inspection >> Pre-Delivery Inspection (PDI) Procedure >> Push Button Start Function >> MT model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MT model

  1. Get into the vehicle while carrying the access key, with the clutch pedal OFF, and check that it cycles through ignition switch OFF → ACC ON → ignition switch ON → ignition switch OFF every time the push button ignition switch is pressed, and that the combination meter display switches as follows.
    • Ignition switch OFF: No display
    • ACC ON: Accessory
    • Ignition switch ON: Ignition ON
  2. Get into the vehicle while carrying the access key, with the clutch pedal ON, check that the message "When starting the engine, press the push button ignition switch while depressing the brake pedal and clutch pedal" is displayed on the combination meter display.
  3. Get into the vehicle while carrying the access key, with the clutch pedal ON, check that the engine starts when you press the push button ignition switch.
  4. With the vehicle stopped and the engine running, check that the engine stops when you press the push button ignition switch.
scientia non olet · About LEMON Manuals