Steering Lock Control Module: Replacement

CAUTION:

When the control module related to immobilizer has been replaced, be sure to perform the registration of immobilizer system. For details, refer to "SPECIFICATION" in "General Description". Ref. to SECURITY AND LOCKS>GENERAL DESCRIPTION>SPECIFICATION>IMMOBILIZER REGISTRATION .
Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
Do not allow harness and connectors to interfere or get tangled up with other parts.
If the steering wheel and steering angle sensor (steering roll connector) are removed, perform "VDC Centering Mode" of the VDC. Ref. to VEHICLE DYNAMICS CONTROL (VDC)>VDC CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VDCCM & H/U)>ADJUSTMENT>VDC SENSOR MIDPOINT SETTING MODE .

For operation procedures of the steering lock control module, refer to "Ignition Key Lock". Ref. to SECURITY AND LOCKS>IGNITION KEY LOCK .