Ignition Timing: Inspection

Before checking the ignition timing, check the following item:
1. Check the air cleaner element is free from clogging, spark plugs are in good condition, and hoses are connected properly.
2. Check the malfunction indicator light does not illuminate.
Warm up the engine.
Read the ignition timing using Subaru Select Monitor.
2.0 L model :

Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.0)>DATA MONITOR>OPERATION .

2.5 L model :

Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.5)>DATA MONITOR>OPERATION .

NOTE: If the ignition timing is out of standard, refer to the basic diagnostic procedure of "ENGINE (DIAGNOSTICS)".

2.0 L model :

Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.0)>BASIC DIAGNOSTIC PROCEDURE .

2.5 L model :

Ref. to ENGINE (DIAGNOSTICS) (H4DO 2.5)>BASIC DIAGNOSTIC PROCEDURE .

Ignition timing [BTDC/{r/min}] :

2.0 L model

Standard

6°±10°/775

2.5 L model

Standard

8°±10°/675