Transmission Case: Disassembly
- Remove the oil stopper plate.
- Remove each plug and oil control valve holder.
(A) Oil control valve holder - Remove the CVTF filter cover, gasket and CVTF filter.
(A) CVTF filter cover (B) Gasket (C) CVTF filter - Remove the roller bearing using the ST1 and ST2.
- Preparation tool:
ST1: PULLER ASSY (398527700)
ST2: CLAW (18760AA000)
- Remove the thrust bearing and oil guide.
(A) Thrust bearing (B) Oil guide - Preparation tool: