LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> WRX Limited, Automatic CVT Trans >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Infotainment >> Entertainment System >> Data Communication Module >> Installation >> Data Communication Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Communication Module

  1. Install the backup battery. Ref. to ENTERTAINMENT & MONITORING>DATA COMMUNICATION MODULE>INSTALLATION>BACKUP BATTERY .
  2. Install the data communication module and connect the cable CCM connector.
    CAUTION: Never install a data communication module from another vehicle. It may disable recognition of vehicle information and cause communication error.
  3. Install the center information display assembly. Ref. to ENTERTAINMENT & MONITORING>COCKPIT DISPLAY>INSTALLATION .
  4. Install the panel assembly center and the ornament panel mid passenger. Ref. to EXTERIOR/INTERIOR TRIM>CENTER CLUSTER>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  6. Perform the registration if the data communication module is replaced with a new part. Ref. to ENTERTAINMENT & MONITORING>TELEMATICS SYSTEM>OPERATION .
  7. Check the LED illumination status of the telematics button. Ref. to TELEMATICS SYSTEM (DIAGNOSTICS)>CHECK LIST FOR INTERVIEW>CHECK>LED ILLUMINATION STATUS LIST .
scientia non olet · About LEMON Manuals