LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2025 >> Impreza Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Relay and Fuse >> Inspection >> Check Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    3 - 1 Always 1 MΩ or more BWT*AU
    G13621302Courtesy of SUBARU OF AMERICA, INC.
    3 - 5 Always Less than 1 Ω
    3 - 1 Apply battery voltage between terminals 4 and 2. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals