Removal Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Remove the inner front door trim panel. Refer to FRONT SIDE DOOR TRIM PANEL REPLACEMENT .
Remove the front door water deflector. Refer to FRONT SIDE DOOR WATER DEFLECTOR REPLACEMENT .

Fig 1: Identifying Front Side Door Window Belt Inner Sealing Strip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the inner belt seal. Refer to REMOVAL PROCEDURE .
Lower window to access window release tab.

Fig 2: Identifying Window Regulator Guide Plate
Courtesy of SUZUKI OF AMERICA CORP.
Depress the window release tab with a flat-bladed tool.
Pull the window out of the window regulator guide plate.
Slide the window down and out of the primary window run channels.
Remove the window by tilting outboard and pulling the window out of the door.