LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1987 >> Samurai Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Lubrication System) >> Repair Instructions >> Engine Oil Pressure Sensor and/or Switch Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Oil Pressure Sensor
G04842496Courtesy of SUZUKI OF AMERICA CORP.
CAUTION: Refer to FASTENER NOTICE .
  1. Install the oil pressure sensor (1).

    Tightening torque 

    Tighten the oil pressure sensor to 20 N.m (15 lb ft)  .

  2. Connect the oil pressure sensor electrical connector.
scientia non olet · About LEMON Manuals