Installation Procedure

WARNING: This page is about a different car, the 2007 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying MAF/IAT Sensor Screws (2 Of 2)

Courtesy of SUZUKI OF AMERICA CORP.

Install the MAF/IAT sensor seal to the MAF/IAT sensor.
Install the MAF/IAT sensor to the air cleaner assembly.
CAUTION: Refer to FASTENER NOTICE .
Install the MAF/IAT sensor screws.
Tightening torque

Tighten the screws to 4 N.m (35 lb in) .

Fig 2: Installing Air Cleaner Outlet Duct
Courtesy of SUZUKI OF AMERICA CORP.
Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
Install the air cleaner outlet duct. Refer to INSTALLATION PROCEDURE .