LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1993 >> Sidekick JS, 2D Utility, Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Fuel System >> Fuel Delivery >> Fuel Pump Circuit Test (Swift SOHC)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Circuit Test (Swift SOHC)

  1. With ignition on and engine off, listen for operating sound of fuel pump. Pump should run for 2 seconds after switch is turned on.
  2. If operating sound is not heard, go to next step. If operating sound is heard, fuel pump circuit is okay. Check fuel pressure to ensure pump is operating at full volume. See BASIC TESTING article.
  3. Remove fuel pump relay. See FUEL PUMP RELAY LOCATION  table under RELAYS & SOLENOIDS. See Figure . Apply battery voltage to Pink wire terminal (harness side of connector) and ground to body.
  4. If pump operates, go to next step. If pump does not operate, check continuity of Pink wire between fuel pump relay and pump (in tank). If continuity exists, replace pump. If continuity does not exist, repair circuit.
  5. Turn ignition on. Check for battery voltage on Black/White and White/Blue wire terminals of fuel pump relay connector. If battery voltage is present on both terminals, go to next step. If battery voltage is not present on one or both terminals, check appropriate fuses and feed circuits.
  6. Check fuel pump relay. See RELAYS  under RELAYS & SOLENOIDS. If fuel pump relay is okay, check continuity of Pink/White wire between fuel pump relay and ECM connector terminal B10. If circuit is okay, replace ECM.
scientia non olet · About LEMON Manuals