Ignition Timing

IGNITION TIMING (Degrees BTDC @ RPM) ⁽¹⁾

Application

Man. Trans.

Auto. Trans.

DOHC

⁽²⁾ 5-7 @ 800-900

⁽¹⁾	See Fig 1 for timing mark location.

⁽²⁾	With jumper wire installed between "D" and "E" terminals of test connector, located near ignition coil

NOTE: Ensure ignition timing advances as engine speed increases.

Fig 1: Identifying Ignition Timing Mark (Typical)

Courtesy of SUZUKI OF AMERICA CORP.