LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1995 >> Sidekick JS, 2D Utility, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Cruise Control System) >> Component Testing >> BRAKELIGHT Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

BRAKELIGHT Switch

WARNING: This page is about a different car, the 1996 Suzuki X-90 and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect electrical connector at brakelight switch, located near top of brake pedal. SeeFigure . Remove brakelight switch from mounting bracket. Note terminals on brakelight switch. SeeFig 1 .
  2. Connect ohmmeter between terminals No. 1 and 2 on brakelight switch. Continuity should exist with plunger on brake switch fully outward and no continuity should exist with plunger fully depressed.
  3. Remove ohmmeter. Connect ohmmeter between terminals No. 3 and 4 on brakelight switch. No continuity should exist with plunger on brake switch fully outward and continuity should exist with plunger fully depressed. Replace brakelight switch if defective.
  4. Reinstall brakelight switch. Adjust brakelight switch. See BRAKELIGHT SWITCH  under ADJUSTMENTS.
Fig 1: Identifying Brakelight Switch Terminals
G96J10735Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals