Set/Coast, ACCEL/Resume & Cancel Switch Assembly

WARNING: This page is about a different car, the 1996 Suzuki X-90 and 1996 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect electrical connector for switch assembly at steering column. It may be necessary to remove switch assembly from steering column. For Sidekick see STEERING COLUMN SWITCHES , for X90 see STEERING COLUMN SWITCHES article.
Note electrical connector terminal identification. SeeFigure . Using ohmmeter, check for continuity between specified terminals with each switch in ON position. See SWITCH ASSEMBLY CONTINUITY . Replace switch assembly if continuity does not exist as specified.

SWITCH ASSEMBLY CONTINUITY ⁽¹⁾

Switch Application

Terminals No.

SET/COAST

1 & 3

ACCEL/RESUME

2 & 3

CANCEL

3 & 4

⁽¹⁾	Switch continuity is checked w/switch in ON position.