LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 1996 >> Sidekick JS, 2D Utility, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Anti-Lock Brake System) >> Component Tests >> Front Wheel Speed Sensor >> Resistance Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Resistance Check

WARNING: This page is about a different variant/trim than selected.

Remove front wheel speed sensor. See FRONT WHEEL SPEED SENSOR  under REMOVAL & INSTALLATION. Measure resistance between sensor harness connector terminals. Wheel speed sensor resistance should be 1200-1600 ohms at 68°F (20°C). Measure resistance between each sensor harness connector terminal and wheel speed sensor body. Insulation resistance should be one megohm or greater. If either resistance test is not as specified, replace wheel speed sensor.

scientia non olet · About LEMON Manuals