Ignition Timing

WARNING: This page is about a different car, the 1996 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.

IGNITION TIMING (Degrees BTDC @ RPM) ⁽¹⁾

Application

Man. Trans.

Auto. Trans.

Swift

⁽²⁾ 4-6 @ 800-900

⁽¹⁾	See Fig 1 for timing mark location.

⁽²⁾	With jumper wire installed between terminals "D" and "E" of test connector, located next to left strut tower. See Fig 2 .

NOTE: Ensure ignition timing advances as engine speed increases.

Fig 1: Locating Ignition Timing Mark (Typical)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Identifying Test Connector Terminals

Courtesy of SUZUKI OF AMERICA CORP.