BRAKELIGHT Switch Circuit Check
WARNING: This page is about a different car, the 1995 Suzuki Sidekick. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure ignition is off. Disconnect electrical connector at CC ECU. Depress brake pedal. Using voltmeter, check voltage between ground and CC ECU connector terminal No. 7 (3-speed A/T and M/T) or terminal No. 4 (4-speed A/T) with brake pedal depressed. See Figure or Figure . Voltage should be 10-14 volts.
- If voltage is not within specification, check fuses, wiring and electrical connectors for related wiring circuit. See appropriate wiring diagram under WIRING DIAGRAMS . Repair fuses, wiring or electrical connectors as necessary.
- If fuses, wiring and electrical connectors are okay, check brakelight switch. See BRAKELIGHT SWITCH under COMPONENT testing.