Throttle Position (TP) Sensor

WARNING: This page is about a different car, the 1997 Suzuki Swift. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: See PIN VOLTAGE CHARTS article and appropriate wiring diagrams in WIRING DIAGRAMS article for PCM connector and wire terminal identification.

THROTTLE POSITION (TP) SENSOR VOLTAGE ⁽¹⁾⁽²⁾

Application

Volts

With .140" (3.5 mm) Clearance At Stop Screw

0.98-1.02

⁽¹⁾	Ignition on and engine off.

⁽²⁾	Using a voltmeter, backprobe between PCM connector "B", terminals No. 6 (Light Green/White wire) and No. 9 (Light Green/Black wire).