Power Window Sub-Switch: Esteem
Disconnect power window sub-switch harness connector. Using an ohmmeter, ensure continuity exists across specified switch terminals with switch in appropriate position. See POWER WINDOW SUB-SWITCH CONTINUITY table. See Fig 1 . If continuity does not exist, replace power window sub-switch.
POWER WINDOW SUB-SWITCH CONTINUITY
| Switch Position | Between Terminals No. |
|---|---|
| UP | 1 & 2; 3 & 5 |
| OFF | 1 & 2; 4 & 5 |
| DOWN | 1 & 3; 4 & 5 |