LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2003 >> XL-7 Base, RWD >> Repair and Diagnosis >> Quick Lookups >> Common Specs & Procedures >> Specifications Index
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Specifications Index

XL-7 SPECIFICATIONS INDEX

System Specification/Procedure
Air Conditioning
Service General Description
Torque Tightening Torque Specifications
Axle Nut/Hub Nut
Front 37 Ft. Lbs. (50 N.m)
Battery n/a
Brakes
Bleeding Sequence BRAKE BLEEDING SEQUENCE
ABS Anti-Lock Brake System
Type 1
Service Specifications General Description
Torque Tightening Torque Specifications
Type2
Service Specifications General Description
Torque Tightening Torque Specifications
Disc Brakes
Service Specification DISC BRAKE SPECIFICATIONS
Torque Specification TORQUE SPECIFICATIONS
Drum Brakes
Service Specification DRUM BRAKE SPECIFICATIONS
Torque Specification TORQUE SPECIFICATIONS
Charging
Generator GENERATOR SPECIFICATIONS
Torque TORQUE SPECIFICATIONS
Drive Belts
Adjustment DRIVE BELT ADJUSTMENTS
Belt Routing DRIVE BELT ROUTING
Engine Cooling
General Service Specifications General Description
Radiator Cap Pressure 15.6 psi
Thermostat R & I Thermostat Removal and Installation
Water Pump R & I Water Pump Removal and Installation
Engine Mechanical
Compression Compression Check
Oil Pressure 390 - 470 kPa (3.9 - 4.7 kg/cm2 , 55.5 - 66.8 psi) at 4000 RPM
Overhaul Refer to appropriate Component specification information under Repair Instructions .
Torque Tightening Torque Specifications
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate/Drive PlateTorque 50.5 Ft. Lbs. (70 N.m)
Fuel System
Pressure Specification
Key On, Engine Off 38.4-44.0 psi (2.7-3.1 kg/cm2 )
Engine Idling 29.9-37.0 psi (2.1-2.6 kg/cm2 )
Fuel Pressure Test Procedure Fuel Pressure Inspection
Fuel Filter Location Fuel Filter Removal and Installation
Fuel Filter R & I Fuel Filter Removal and Installation
Ignition
Firing Order & Cylinder Identification FIRING ORDER & CYLINDER IDENTIFICATION
Ignition Wires IGNITION TIMING
Spark Plug
Denso (SK16PR11)
Gap .039-.043 (1.0-1.1)
Torque 18 ft. lbs.(25 N.m)
NGK (IFR5J11)
Gap .039-.043 (1.0-1.1)
Torque 18 ft. lbs.(25 N.m)
Starting
Starter STARTER SPECIFICATIONS
Torque
Starter Motor Mounting Bolts 17 ft. lbs.(23 N.m)
Battery Cable-To-Starter 89 ft. lbs.(10 N.m)
Wheel Alignment
Adjustment Specifications GRAND VITARA
Torque TORQUE SPECIFICATIONS
Wheel & Tire
Wheel Lug Nut Torque 70 Ft. Lbs. (95 N.m)