Setup for Component Replacement

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

The replacement of some components will require a setup procedure for complete repair.

If any of the following components are replaced, an Idle Learn Procedure must be performed. Refer to the appropriate procedure:
- Idle Learn for the 1.6L (L91) engine
  - Throttle body assembly
  - ECM
If any of the following components are replaced, a CKP Variation Learn Procedure must be performed. Refer to the appropriate procedure:
- Crankshaft Position System Variation Learn for the 1.6L (L91) engine
  - CKP sensor
  - Engine replacement
  - Any engine repair that disturbs the relationship between CKP sensor and the crankshaft reluctor wheel.