LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2005 >> Reno S, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Electrical Devices >> Repair Instructions >> Throttle Position Sensor Removal and Installation >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position Sensor Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the air intake tube and resonator.
  3. Disconnect the throttle position (TP) sensor connector.
  4. Remove the TP sensor retaining bolts and the TP sensor.
    Fig 1: Disconnecting Throttle Position Sensor Connector
    G04102607Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals