Scan Tool Data Definitions

The Data Display function contains lists of ABS and TCS data parameters. A brief description of all ABS and TCS data parameters available on the scan tool are listed below. The list is arranged in alphabetical order.

ABS Warning Indicator

The scan tool will display On or Off depending on the state of the ABS indicator.

Battery Voltage Signal

The scan tool displays 0 to 30 Volts. The voltage measured between the module's battery positive voltage circuit and ground circuit.

Brake Switch

The scan tool displays Applied or Released. The scan tool displays the state of the brake switch.

DRP Disabled

The scan tool will display Yes or No. This will indicate if the DRP has been disabled.

LF Wheel Speed Sensor

The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the left front wheel.

LR Wheel Speed Sensor

The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the left rear wheel.

LF Inlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the LF inlet solenoid.

LF Outlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the LF outlet solenoid.

LR Inlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the LR inlet solenoid.

LR Outlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the actual state of the LR outlet solenoid.

Pump Motor Command

The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor.

Pump Motor Relay Command

The scan tool displays On or Off. The scan tool displays the commanded state of the pump motor relay.

RF Wheel Speed Sensor

The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the right front wheel.

RR Wheel Speed Sensor

The scan tool displays 0-255 km/h (0-158 mph). The scan tool displays the actual speed of the right rear wheel.

RF Inlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the RF inlet solenoid.

RF Outlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the RF outlet solenoid.

RR Inlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the RR inlet solenoid.

RR Outlet Solenoid Command

The scan tool displays On or Off. The scan tool displays the commanded state of the RR outlet solenoid.

Solenoid Relay Command

The scan tool displays On or Off. The scan tool displays the commanded state of the solenoid relay.