P/S System Specification and Service Data
SYSTEM SPECIFICATION AND SERVICE DATA
| Item | Specification | |
|---|---|---|
| Hydraulic pressure Control | Relieved pressure | 8,400 kPa (84 kg/cm2 or 1,195 psi) |
| Control device | Flow control valve | |
| Relief valve | ||
| Power steering pressure switch | Switch turns on (closes) when the pressure is higher than 2,400 - 3,100 kPa (24 - 31 kg/cm2 , 341 - 441 psi). ECM uses this signal for idle speed control. | |
| Specified fluid | An equivalent of DEXRON®-III, DEXRON®-IIE or DEXRON®-II | |
| Fluid capacity of system | about 0,86 liters (1.8/1.5 US/lmp pt.) | |
|
CAUTION:
The value is rough amount of fluid in entire system. Fluid level should be within "LOWER" and "UPPER" level marks on fluid reservoir, which means that appropriate amount of fluid is in it. (For details, refer to P/S FLUID LEVEL CHECK .)
|
||
| Steering Wheel Play | 0 - 30 mm (0 - 1.2 in.) | |
| Steering force | Less than 40 N (4.0 kg, 8.8 lb) (Refer to STEERING FORCE CHECK for procedure of force check.) | |
| P/S belt tension | Refer to GENERATOR DRIVE BELT INSPECTION . | |