LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Reno Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Engine - Diagnostic Codes (3 Of 4) >> DTC P0604: Control Module Random Access Memory (RAM) >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0604: Control Module Random Access Memory (RAM): Troubleshooting

TROUBLESHOOTING CHART

Step Action Value (s) Yes No
1 Perform an ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK . Is the system check complete? - Go to Step 2 Go to ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK
2 Replace the Engine Control Module (ECM).
Is the replacement complete?
- Go to Step 3 -
3
  1. Using the scan tool, clear the (DTCs).
  2. Start the engine and idle at normal operating temperature.
  3. Operate the vehicle within the conditions for setting this DTC as specified in the supporting text.

Does the scan tool indicate that this diagnostic has run and passed?
- Go to Step 4 Go to Step 2
4 Check if any additional DTCs are set.
Are any DTCs displayed that have not been diagnosed?
- Go to applicable DTC TABLE System OK