LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> SX4 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 154 (Keyless Start System) >> Diagnostic Information And Procedures >> Keyless Start System Operation Inspection >> Keyless engine start operation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless engine start operation

WARNING: This page is about a different car, the 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Sit in driver seat with remote controller carried with you.
  2. Check that all doors are closed and ignition key is not inserted in ignition key cylinder.
  3. While pushing ignition knob switch (1) of steering lock unit, check if ignition knob switch can be turned from its lock position.

    If key indicator lamp (2) in combination meter lights in blue and ignition knob switch can be turned from its lock position in this check, keyless engine start operation is in good condition.

    If key indicator lamp in combination meter lights in red and ignition knob switch cannot be turned from its lock position in this check, go to KEYLESS START SYSTEM CHECK .

    NOTE: Pushing ignition knob switch for 5 seconds or longer causes function to protect steering lock releasing solenoid against heat to work. Then steering lock unit stops energizing solenoid, preventing ignition knob switch from turning. At the same time, key indicator lamp in combination meter turns off. In such case, take your hand off from ignition knob switch once and operate it again.
    Fig 1: Pushing Ignition Knob Switch Of Steering Lock Unit
    G04810063Courtesy of SUZUKI OF AMERICA CORP.