LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Camshaft Position Sensor ReplacementRemoval Procedure >> Removal ProcedureInstallation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal ProcedureInstallation Procedure

    Fig 1: Identifying Cover Screws
    GM1371851Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove the engine cover bolts and the nuts.
  3. Remove the engine cover.
    4. Fig 2: Disconnecting And Connecting CMP Sensor Electrical Connector And Bolt
    GM1289481Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the camshaft position (CMP) sensor electrical connector.
  5. Remove the timing belt front cover. Refer to Timing Belt Replacement .
scientia non olet · About LEMON Manuals