LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Spark Plug Wire ReplacementRemoval Procedure >> Removal ProcedureInstallation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal ProcedureInstallation Procedure

  1. Turn OFF the ignition.
    2. Fig 1: Identifying Cover Screws
    GM1371851Courtesy of GENERAL MOTORS CORP.
  2. Remove the engine cover from the engine.
    3. Fig 2: Identifying Spark Plug Wire & Coil
    GM1456946Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the spark plug wire (1) at each spark plug.
    • Twist each spark plug boot 1/2 turn before removing.
    • Pull only on the boot or use a tool designed for this purpose in order to remove the wire from each spark plug.
  4. Disconnect the spark plug wire from the coil (2).
    • Twist each spark plug boot 1/2 turn before removing.
    • Pull only on the boot or use a tool designed for this purpose in order to remove the wires from the coil.
scientia non olet · About LEMON Manuals