LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> Swift + >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls & Fuel - 1.6L - Introduction (2 Of 2) >> Repair InstructionsEngine Control Module Replacement >> Air Cleaner Inlet Duct ReplacementRemoval Procedure >> Removal ProcedureInstallation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal ProcedureInstallation Procedure

  1. Turn OFF the ignition.
  2. Disconnect the electrical connector from the intake air temperature (IAT) sensor.
  3. Disconnect the breather tube from the air cleaner intake duct.
  4. Fig 1: Locating Intake Ducting To Engine
    GM1241530Courtesy of GENERAL MOTORS CORP.
  5. Loosen the clamps securing the air cleaner intake duct.
  6. Remove air cleaner intake duct.