LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Data Communication System >> Repair Instructions >> Body Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: If data is not retrieved from the malfunctioning body control module (BCM), additional time will be required to program the replacement BCM.
  1. Retrieve data from the malfunctioning BCM. Refer to CONTROL MODULE REFERENCES .
  2. Rotate the ignition switch to the OFF position.
    Fig 1: BCM Electrical Harness Connectors
    G04844993Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the Instrument Panel Lower Brace Bezel. Refer to INSTRUMENT PANEL LOWER BRACE BEZEL REPLACEMENT .
  4. Disconnect the BCM electrical harnesses.
    Fig 2: Identifying Body Control Module (BCM)
    G04844994Courtesy of SUZUKI OF AMERICA CORP.
  5. Remove the BCM (1) from the instrument panel (I/P) retainer:
    1. Pry the BCM tabs from the locking tabs on the underside of the restraint.
    2. Slide the BCM out of the retainer.
scientia non olet · About LEMON Manuals