LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2007 >> XL7 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Repair Instructions >> Ignition Coil Replacement - Bank 1 >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

Fig 1: Identifying Engine Wiring Harness Electrical Connector From Ignition Coil
G04843458Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).
    Fig 2: Identifying Ignition Coil Bolt
    G04843459Courtesy of SUZUKI OF AMERICA CORP.
  3. Remove the ignition coil bolt(s).
  4. Remove the ignition coil(s).
scientia non olet · About LEMON Manuals